Few things can be as frustrating as picture problems. You get your system all ready to go, flip the switch, and WHAM! One or more channels look terrible. The good news is that the majority of video problems can be traced to just a few causes. Most problems are comprised of the following:
Lcd Touchscreen Vga
Snow
Lcd Touchscreen Vga
Horizontal bars rolling though the picture
Vertical bars rolling through the picture
Ghosting
Herringbone pattern (diagonal lines through picture)
Lower channels look fine, upper channels are not
These six are the main symptoms you'll find when seeing video problems. Thankfully, most are fairly easy to fix.
Snow -
Snow is caused by inadequate signal strength at the tuner. It's usually caused by:
1 Splitting the signal too many times.
2 A weak signal from the antenna or cable company
3 A very long cable run
If the signal is snowy at all your TVs, especially if you have more than 4 TVs, you probably need an RF amplifier. Check the strength at the demark (service entrance). If it is fine there, add an amplifier before the splitter. Make sure to use a quality unit with good bandwidth (out to at least 1000MHz). If you have digital cable or a cable modem, get an amplifier with a bidirectional return path to allow for communication back to the cable company. If the picture looks bad at the demark, contact the cable company.
If it is bad at only one TV, you may have a bad cable between the splitter and the TV or a very long run of cable. You can amplify just that run.
Horizontal Rolling Bars -
Horizontal rolling bars are caused by DC power getting into the cable system. To fix it, disconnect the TV from all other components in the system. If the bars disappear, add the other components back in until the bars return. When you find the offending component, use a DC blocker to eliminate the DC power path to the system.
Vertical Rolling Bars -
Vertical rolling bars are caused by AC power getting on the cable line. The best fix for this is to use a ground breaker. A ground breaker eliminates the electrical connection between the TV and the cable system. A ground breaker is also the main fix for a hum on your audio system's speakers.
Ghosting -
Ghosting is caused by the tuner receiving identical signals at slightly different times. It can be caused by your TV receiving a local station broadcasting over the air and via the cable system at the same time. Make sure you are using good quality RG-6 coax cable and good compression fittings. Replace any low quality cable splitters or combiners with high quality units. Make sure they are tight also. This will also cure another cause of ghosting, signal reflection inside a poor cable.
Ghosting can also be caused by multi-path interference on an antenna system. This is especially true in an urban environment with lots of hills and tall buildings. To combat this, use a very directional antenna aimed directly at the desired station.
Herringbone Pattern -
A herringbone pattern is caused by radio frequency interference from other stations transmitting on the same channel or adjacent channels, powerful radio signals, computers, etc. Another common cause is being equidistant from two transmitters operating on the same channel.
In short, this can be caused by just about any sort of RF radiation at the correct frequency. Really great shielding found on high quality cables helps to combat this. If you are getting this interference while modulating an A/V source on a certain channel, try switching to a different channel.
Poor Upper Channel Reception -
Poor Upper Channel Reception is caused by poor signal strength on the upper channels. Use an amplifier with a tilt compensator that allows adjustment of the upper channels relative to the lower channels. This will prevent overdriving the lower channels while providing the upper channels with enough gain. Also, check to see if all components in the RF system are rated to at least 1GHz and RG-6 or RG-6Quad shield cable is being used throughout.
How to Troubleshoot Video Problems
Lcd Touchscreen Vga
Nov 25, 2011 07:12:23
Click for larger image and other views
>> Click here to update Black Friday prices for Koolertron (TM) 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry <<
Black Friday Koolertron (TM) 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry Feature
- 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry
- This is a high quality 17 " inch VGA LCD stand Touch Screen Monitor, ideal choice for home PC/Laptop, industrial, control and POS terminals....
- Touch Screen USB Interface, can work with touch pen or your finger, no mouse required.
- Compatible for DOS, WinXP, WIN9X,2000,ME,WinCE 6.0, WinCE.NET, WinNT 4.0, Linux, Vista, Mac OS, QNX Neutrino RTOS V6.3 and Win Embedded.
- Resolution: 1024 X 768 to 1280X1024.
Black Friday Koolertron (TM) 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry Overview
NEW 17" VGA TFT LCD Touch Screen Monitor
* This is a high quality 17 " inch VGA LCD stand Touch Screen Monitor, * Touch Screen USB Interface, can work with touch pen or your finger, no mouse required.
* Compatible for DOS, WinXP, WIN9X,2000,ME,WinCE 6.0, WinCE.NET, WinNT 4.0, Linux, Vista, Mac OS, QNX Neutrino RTOS V6.3 and Win Embedded.
* Resolution: 1024 X 768 to 1280X1024.
Quality Control: All the touchscreen monitor that we are selling are from manufacturer directly, It's specializing in designing, developing, manufacturing and marketing of various TFT LCD monitor, LCD TV, car audio & video system etc.
Key Specifications
System parameters Working Voltage: DC 11.5-13V, AC100-240V
Power Consumption: 22W
Working Current: 1200mA
Working Temperature: 0~60?
LCD panel: Samsung /LG/ PHILIP
Input configuraion: VGA(15 Pin standard D-sub), 1 channel L/R audio input
Aspect Ratio: 4:3 17 inches (diagonal)
Refresh Rate: <= 75HZ
Resolutions: 1024(H)×(RGB)×768(V)
Adjust Angle: Verticale
Touch Screen: 4-wire Resistive
Hardness: 3H
Touch Controller: USB2.0
OSD: Multi-Language OSD Control Menu
Built-in speaker: Yes
Chromatic System:
Contrast: 500:1
LCD Brightness: 300 cd/m2
Response time: <=25ms
View Angle: 45/60(U/D), 65/65(L/R), 150 degree
Product functions 17" Digital TFT-LCD Panel
Full Function Wireless Remote Controller
Touch Panel Function(Stylus Included)
VGA Port can match with GPS and Car PC.
The Highest Resolution is to 1920×1200
Operated System is WIN9X,2000,ME,CE/Linux,Vista and so on.
***Please kindly notice before purchase***:Order will be shipped via DHL/UPS EXPRESS service(3-5 days delivery,
NOT 17-28 days indicated by amazon system) when parcel shipped out.Thanks for your understanding!
SAVE NOW on Black Friday offers below!
Available In Stock. |
| This Black Friday Koolertron (TM) 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry ships for FREE with Super Saver Shipping. |
|
Limited Offer Today!! Koolertron (TM) 17" inch Stand Touch Screen LCD Monitor with VGA for PC POS Gaming Industry Black Friday and Cyber Monday 2011 Deals
External Hdd Enclosure
